We want to hear your feedback! Submit your Questions, Ideas, Suggestions, and Problems.
Keine ähnlichen Beiträge gefunden.
0
Beantwortet
how do you log in?
I've been away a short while. I see the site has been redesigned, and now I cannot log in. I'm a paid member, I'd like my access restored please.
Antwort
Inna Komarovsky
vor 11 Jahren
Hi Sean,
On the new site, there's no need to log in because the old forum has been removed so that this feedback site can be the main place for questions and comments. You still have access to the premium features whenever you are logged in to the InteractBuilder software with your email address and password. Let us know if you need to recover any of that or if you need to download InteractBuilder again.
On the new site, there's no need to log in because the old forum has been removed so that this feedback site can be the main place for questions and comments. You still have access to the premium features whenever you are logged in to the InteractBuilder software with your email address and password. Let us know if you need to recover any of that or if you need to download InteractBuilder again.
0
Beantwortet
tilt
How do we identify if "Tilt" interaction is left or right? Based on the direction of the tilt I want to move my object.
Antwort
Alin Alexandru Matei
vor 11 Jahren
There is no way at this moment to make a differention between Tilt Left and Tilt Right. Your object will move left if the device is tilt to the left and it will move to the right if the device is tilt to the right.
0
Beantwortet
sharing-ok to laptop- won't size down to iphone
Ann K AlteredEssence vor 11 Jahren
•
aktualisiert von Ezra Weinstein (Administrator) vor 11 Jahren •
2
sharing-ok to laptop- won't size down to iphone. Is there a step I'm missing to be able to use the app on the iphone?
Antwort
Ezra Weinstein (Administrator)
vor 11 Jahren
Ann, we discovered the issue and it will be updated in the next version of the InteractPlayer.
0
Wird überprüft
Modes Needed When Highlighting Audio
I suggest that the timing edit page (timing for hightlighting each
word) should have a relative/absolute mode button.
If it is absolute (default), just change the single timing element. If it is relative, then adjust all elements
after by this word by the same amount as well.
I have come across an example where I pause too long on one word and all
of the words after then play too late and I would have to edit each word
thereafter manually even though the timing is well done, just not in sync on one word early on.
0
Fertiggestellt
would like to view a replay of egg hatching App you did on one of the webinars
About 6 weeks ago you displayed the egg hatching application in one of your webinars. Where can I view this again.
0
Not a bug
.mp3 Audio not looping when set to execute on page load
I have an .mp3 file set to play on page load which it does fine in Interact mode, however it won't loop, even though I have it set to loop. Not sure if it is a file size issue. The audio clip is 1.1 MB, but its only about 20 secs long. I also tried setting the replay on the audio to 5 times and it still did not loop. Thanks for any suggestions to resolve this. Also FYI, when I exited from Interact mode back to Design mode, I got this error message below:
InteractBuilder Version: 3.3 Build 325
Device: MacBook Pro
Processor: Intel Core i7
Memory: 4 GB
System: 10.7.5
--------------------
An application error occurred while attempting to perform the last action.
Restarting InteractBuilder is recommended.
An application error occurred while attempting to perform the last action.
Restarting InteractBuilder is recommended.
Error: Chunk: no such object / Chunk: error in object expression / Chunk: can't find object / Object: does not have this property / Factor: error in left operand / Operators =: error in operand / wait: error in expression
Handler: Behavior_PlayAudio
Hint: 8607183
Location: Line 0, char 1
Object: button id 1008 of group id 1010 of card id 1002 of stack "Behaviors" of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
89: Line 0 at char 1: Chunk: no such object ----> 8607183
69: Line 6156 at char 41: Chunk: error in object expression ----> player id 8607183 of card id 1140 of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
77: Line 6156 at char 41: Chunk: can't find object
456: Line 6156 at char 25: Object: does not have this property
198: Line 6156 at char 44: Factor: error in left operand
181: Line 6156 at char 44: Operators =: error in operand
625: Line 6156 at char 1: wait: error in expression
253: Line 6155 at char 1: if-then: error in statement
490: Line 6153 at char 1: repeat: error in statement
253: Line 6152 at char 1: if-then: error in statement
241: Line 6152 at char 1: Handler: error in statement ----> Behavior_PlayAudio
353: Line 0 at char 0: Object Name: ----> button id 1008 of group id 1010 of card id 1002 of stack "Behaviors" of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
573: Line 3540 at char 1: Handler: can't find handler ----> Behavior_PlayAudio
587: Line 3202 at char 1: switch: error in statement
253: Line 3172 at char 1: if-then: error in statement
253: Line 3169 at char 1: if-then: error in statement
253: Line 3095 at char 1: if-then: error in statement
241: Line 3095 at char 1: Handler: error in statement ----> _Behavior_Do
353: Line 0 at char 0: Object Name: ----> button id 1008 of group id 1010 of card id 1002 of stack "Behaviors" of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
line 150 of handler "errorDialog" of button "stsErrors_FS" of card id 1002 of stack "libSTSErrors"
line 14245 of handler "DoError" of stack "InteractBuilder" of behavior button "Stack B" of card id 1002 of stack "Behaviors"
InteractBuilder Version: 3.3 Build 325
Device: MacBook Pro
Processor: Intel Core i7
Memory: 4 GB
System: 10.7.5
--------------------
An application error occurred while attempting to perform the last action.
Restarting InteractBuilder is recommended.
An application error occurred while attempting to perform the last action.
Restarting InteractBuilder is recommended.
Error: Chunk: no such object / Chunk: error in object expression / Chunk: can't find object / Object: does not have this property / Factor: error in left operand / Operators =: error in operand / wait: error in expression
Handler: Behavior_PlayAudio
Hint: 8607183
Location: Line 0, char 1
Object: button id 1008 of group id 1010 of card id 1002 of stack "Behaviors" of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
89: Line 0 at char 1: Chunk: no such object ----> 8607183
69: Line 6156 at char 41: Chunk: error in object expression ----> player id 8607183 of card id 1140 of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
77: Line 6156 at char 41: Chunk: can't find object
456: Line 6156 at char 25: Object: does not have this property
198: Line 6156 at char 44: Factor: error in left operand
181: Line 6156 at char 44: Operators =: error in operand
625: Line 6156 at char 1: wait: error in expression
253: Line 6155 at char 1: if-then: error in statement
490: Line 6153 at char 1: repeat: error in statement
253: Line 6152 at char 1: if-then: error in statement
241: Line 6152 at char 1: Handler: error in statement ----> Behavior_PlayAudio
353: Line 0 at char 0: Object Name: ----> button id 1008 of group id 1010 of card id 1002 of stack "Behaviors" of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
573: Line 3540 at char 1: Handler: can't find handler ----> Behavior_PlayAudio
587: Line 3202 at char 1: switch: error in statement
253: Line 3172 at char 1: if-then: error in statement
253: Line 3169 at char 1: if-then: error in statement
253: Line 3095 at char 1: if-then: error in statement
241: Line 3095 at char 1: Handler: error in statement ----> _Behavior_Do
353: Line 0 at char 0: Object Name: ----> button id 1008 of group id 1010 of card id 1002 of stack "Behaviors" of stack "/Applications/InteractBuilder.app/Contents/MacOS/Local Components/Data/InteractBuilder.livecode"
line 150 of handler "errorDialog" of button "stsErrors_FS" of card id 1002 of stack "libSTSErrors"
line 14245 of handler "DoError" of stack "InteractBuilder" of behavior button "Stack B" of card id 1002 of stack "Behaviors"
Antwort
Alin Alexandru Matei
vor 11 Jahren
Hi Charmaine, I've tested the loop effect with an mp3 also on page load and it's working great. Could you attach that mp3 file to this post or send it over alin@interactstudios.com to see if it's something wrong with it?
0
Wird überprüft
Browse behaviour issues
Hi guys
I 'd wanted to know if you are still having the problem I had reported some months ago, about browser behaviour working only once when clicking on an object (the browser frame showed only the first time, after that, new clicks resulted in no behaviour at all)
I have my two apps ready adapted to the new version of the software and would like to publish them...
Are you currently submitting apps to Google Play and AppStore, don't you?
regards,
Pablo
I 'd wanted to know if you are still having the problem I had reported some months ago, about browser behaviour working only once when clicking on an object (the browser frame showed only the first time, after that, new clicks resulted in no behaviour at all)
I have my two apps ready adapted to the new version of the software and would like to publish them...
Are you currently submitting apps to Google Play and AppStore, don't you?
regards,
Pablo
Antwort
Inna Komarovsky
vor 9 Jahren
Hi Pablo,
I let our lead programmer know about the problem with the browser. I apologize that I hadn't responded to your earlier message! We are not yet submitting apps to be published because we need to do some more testing to be sure the apps will work on the different platforms, but we'll let everyone know once the process is ready to go.
Regards,
Inna
I let our lead programmer know about the problem with the browser. I apologize that I hadn't responded to your earlier message! We are not yet submitting apps to be published because we need to do some more testing to be sure the apps will work on the different platforms, but we'll let everyone know once the process is ready to go.
Regards,
Inna
0
Beantwortet
Audio management question
I am wondering how I should handle audio narration being interrupted by tappable element audio narration. I'm going to use the highlighted text narration option but wondering if I should make the tappable elements stop the main narration while the element that is tapped plays its short sound clip. Is there a way to make the narrated highlighted main audio resume playing after being interrupted? Thanks for any suggestions on how to best handle this. Or perhaps I won't have narration on the tappable elements, maybe just make them have short sound effects to amuse the viewer? Although it would be nice to have voiceover describing what the tappable element is… thanks for your thoughts.
Antwort
Inna Komarovsky
vor 11 Jahren
One way to do this would be to add the following action sets to the tappable elements that interrupt the narration:
Tap-PauseAudio (Target: the narration audio)
Chained after this behavior: -PlayAudio (Target: the audio that the tappable element should play)
Chained after the behavior above: -PlayAudio (Target: the narration. Behavior options: Delay before: enter the amount of time the sound effect will take)
Tap-PauseAudio (Target: the narration audio)
Chained after this behavior: -PlayAudio (Target: the audio that the tappable element should play)
Chained after the behavior above: -PlayAudio (Target: the narration. Behavior options: Delay before: enter the amount of time the sound effect will take)
0
Wird überprüft
Duplicate Page option not working
Charmaine Anderson vor 11 Jahren
•
aktualisiert von Ezra Weinstein (Administrator) vor 11 Jahren •
0
When I try to duplicate a page with the page manager, and click Apply it throws an error message noted below. And the page isn't duplicated. Thanks for looking into this.
InteractBuilder Version: 3.3 Build 325
Device: MacBook Pro
Processor: Intel Core i7
Memory: 4 GB
System: 10.7.5
--------------------
An error occurred while accessing the database.
An error occurred while accessing the database.
Database Error: 9 values for 28 columns
Query: INSERT INTO PageElements (Id,BookId,PageId,Type,LocationX,LocationY,ImageWidth,ImageHeight,Text,FontName,FontSize,FontBold,FontColor,Visible,FileName,SequenceNumber,RandomGroup,Narration,Global,HighlightColor,HighlightWordDuration,HighlightPeriodDuration,Name,Opacity,FontStyle,VisibleInBuilder,ScrollableBackground,FrameSetId) VALUES ('4434','101','115','T','414','622','200','80','BQAAAAEFAAAA+zEAAAAAAgUAAADIcnVucwAAAAABBQAAALkxAAAAAAMCAAAAHG1ldGFkYXRh')
line 9 of handler "mouseUp" of graphic "MP_Apply" of group "_ManagePagesDialog" of group "ManagePagesDialog" of card "Design" of stack "InteractBuilder"
line 245 of handler "ManagePages_Apply" of group "ManagePagesDialog" of card "Design" of stack "InteractBuilder" of behavior button "ManagePages B" of card id 1002 of stack "Behaviors"
line 6135 of handler "ibTransDB" of stack "libApp" of stack "libApp"
line 6093 of handler "CheckDBErr" of stack "libApp" of stack "libApp"
line 14245 of handler "DoError" of stack "InteractBuilder" of behavior button "Stack B" of card id 1002 of stack "Behaviors"
InteractBuilder Version: 3.3 Build 325
Device: MacBook Pro
Processor: Intel Core i7
Memory: 4 GB
System: 10.7.5
--------------------
An error occurred while accessing the database.
An error occurred while accessing the database.
Database Error: 9 values for 28 columns
Query: INSERT INTO PageElements (Id,BookId,PageId,Type,LocationX,LocationY,ImageWidth,ImageHeight,Text,FontName,FontSize,FontBold,FontColor,Visible,FileName,SequenceNumber,RandomGroup,Narration,Global,HighlightColor,HighlightWordDuration,HighlightPeriodDuration,Name,Opacity,FontStyle,VisibleInBuilder,ScrollableBackground,FrameSetId) VALUES ('4434','101','115','T','414','622','200','80','BQAAAAEFAAAA+zEAAAAAAgUAAADIcnVucwAAAAABBQAAALkxAAAAAAMCAAAAHG1ldGFkYXRh')
line 9 of handler "mouseUp" of graphic "MP_Apply" of group "_ManagePagesDialog" of group "ManagePagesDialog" of card "Design" of stack "InteractBuilder"
line 245 of handler "ManagePages_Apply" of group "ManagePagesDialog" of card "Design" of stack "InteractBuilder" of behavior button "ManagePages B" of card id 1002 of stack "Behaviors"
line 6135 of handler "ibTransDB" of stack "libApp" of stack "libApp"
line 6093 of handler "CheckDBErr" of stack "libApp" of stack "libApp"
line 14245 of handler "DoError" of stack "InteractBuilder" of behavior button "Stack B" of card id 1002 of stack "Behaviors"
Antwort
Ezra Weinstein (Administrator)
vor 11 Jahren
Does this happen on every page you try to duplicate or only this particular page?
0
Wird überprüft
color differences between the imported PSD and the animation elements
Hi,
Another question for you: I imported a RGB PSD file into my page. And then, when I add an animation element onto page (I dragged the png files of an arm waving onto the "Design" screen), the colors are not the same. Screen shot attached.
Actually the animation element (the arm) is more accurate color. Those are the colors I see when I work inside Photoshop. When I import the PSD the colors come in lighter.
I did use "TinyPNG" program to reduce file size.
The artwork for the animation elements was created from the same PSD artwork.
Any hints on getting the colors to match between my PSD imported elements and the PNGs (animation element)?? It looks odd to have a boy with two different skin tones! The darker skin tone is what I want.
Thanks!
Brook
Another question for you: I imported a RGB PSD file into my page. And then, when I add an animation element onto page (I dragged the png files of an arm waving onto the "Design" screen), the colors are not the same. Screen shot attached.
Actually the animation element (the arm) is more accurate color. Those are the colors I see when I work inside Photoshop. When I import the PSD the colors come in lighter.
I did use "TinyPNG" program to reduce file size.
The artwork for the animation elements was created from the same PSD artwork.
Any hints on getting the colors to match between my PSD imported elements and the PNGs (animation element)?? It looks odd to have a boy with two different skin tones! The darker skin tone is what I want.
Thanks!
Brook
Antwort
Inna Komarovsky
vor 10 Jahren
Hi Brook,
Regarding your first question, this is a problem we've noticed as well, and although I'm not sure myself how it works since I'm not on the programming team, I could give you a couple of workarounds to make sure the colors are consistent in your app.
Since you mentioned that you prefer the darker colors, which show up when files are imported as separate PNGs or animations but not as Photoshop documents, the workarounds for this would mean replacing the images assigned to the elements with PNG files.
1. First, there's a script in Photoshop for exporting the layers to PNGs. Open your Photoshop document, and go to File > Scripts > Export Layers to Files. In the window that comes up, you can select a destination and a file prefix (so that all of the exported files are together if they start with the same letters) and then run the script.
2. You'll get a separate file for each layer of the Photoshop image. If you'd like, you can run these through TinyPNG at this point. If you want to place the images yourself, you can just drag this group of files into InteractBuilder and go from there, but if you have a page where you want to keep the locations and action sets you've assigned, then you can use the ideas in step 3.
3. You have two options for replacing the files in your app folder with these new exported PNGs:
Alternatively, if you do decide that the lighter colors are ok and you would rather have the animation colors match the rest of the image, you can follow the steps under the "Corner Dots" heading of this user guide article: Setting Up Your Photoshop File.
(I'll address your other questions in a separate comment)
Regarding your first question, this is a problem we've noticed as well, and although I'm not sure myself how it works since I'm not on the programming team, I could give you a couple of workarounds to make sure the colors are consistent in your app.
Since you mentioned that you prefer the darker colors, which show up when files are imported as separate PNGs or animations but not as Photoshop documents, the workarounds for this would mean replacing the images assigned to the elements with PNG files.
1. First, there's a script in Photoshop for exporting the layers to PNGs. Open your Photoshop document, and go to File > Scripts > Export Layers to Files. In the window that comes up, you can select a destination and a file prefix (so that all of the exported files are together if they start with the same letters) and then run the script.
2. You'll get a separate file for each layer of the Photoshop image. If you'd like, you can run these through TinyPNG at this point. If you want to place the images yourself, you can just drag this group of files into InteractBuilder and go from there, but if you have a page where you want to keep the locations and action sets you've assigned, then you can use the ideas in step 3.
3. You have two options for replacing the files in your app folder with these new exported PNGs:
- One option is to replace them by re-assigning the image file for each element. (Click on an element to see its properties, select the Image field, and then choose Select Image File.)
- The other option is to give each file the same name as the matching file in your app folder. Once you rename the group of files, you can move them to your app folder. Since the files have the same names, you'll get a dialog box asking if you want to replace the files with the new ones, and you can select "Replace."
Alternatively, if you do decide that the lighter colors are ok and you would rather have the animation colors match the rest of the image, you can follow the steps under the "Corner Dots" heading of this user guide article: Setting Up Your Photoshop File.
(I'll address your other questions in a separate comment)
Customer support service by UserEcho
