We want to hear your feedback! Submit your Questions, Ideas, Suggestions, and Problems.
  1. Fòrum: General
0
Respost

My page can not been seen in interact mode

June Alison fa 10 anys • updated by Ezra Weinstein (Administrator) fa 10 anys • 1
My page 10 can not load in interact mode. The other pages seem to load , even though there are some animations that arent working yet. need some advice. thanks
Answer
Ezra Weinstein (Administrator) fa 10 anys
Hi June,

There is another update coming out today that will convert your previous version app again and should resolve these issues.

Ezra
0
Fixed

Deleted hidden global text element still displaying in interact mode

Charmaine Anderson fa 11 anys • updated by Ezra Weinstein (Administrator) fa 11 anys • 1


Please offer a possible solution.  Thank you.


A deleted global, hidden text element is still displaying in Interact Mode.

I suspect the problem is that global elements are not being deleted properly.


History:
I had a hidden global text element that was set to fade in on tap of another global image element. The hidden text element had an action to jump to another page on tap.   It was working just fine until today when I noticed the action on the hidden global text element to jump to another page had stopped working.  


So in Design mode,  I deleted the hidden text element hoping to rebuild it and reset the action so it would work again.   Problem is the deleted element is still displaying in Interact Mode but it is not displaying in Design mode so I can't click the text element to try to fix it or delete it again. 

 I cicked on the lightbulb icon in Design mode to show invisibles but it isn't showing the deleted text element.  When I click the lightbulb icon in Interact mode it will turn the deleted hidden element on and off (even though the element isn't appearing on the stage in design mode).


I also tried selecting all in design mode and it is not showing the item as being on the stage.


I tried to clear the cache but get the error message below.  I rebooted several times, problem still persists.


I also rebuilt the entire page and copied only the elements that were working ok and deleted the original page and the problem is still there. So I think the issue is that maybe global elements aren't being deleted properly by IB3.


InteractBuilder Version: 3.2 Build 308

Device: MacBook Pro

Processor: Intel Core i7

Memory: 4 GB

System: 10.7.5

--------------------

An error occurred while accessing the database.

An error occurred while accessing the database.

near "s": syntax error

Query: SELECT BookId,PageId FROM BookNotes WHERE BookId='100' AND PageID='1'

line 167 of handler "mouseUp" of group "_Row3" of group "PopOverSubmenuTable" of group "PopOverSubmenu" of card "Design" of stack "InteractBuilder" of behavior button "stsTableRow Behavior" of card id 1002 of stack "IBResources"

line 959 of handler "stsTableView_mouseUp" of group "PopOverSubmenu" of card "Design" of stack "InteractBuilder" of behavior button "PopOver B" of card id 1002 of stack "IBResources"

line 4440 of handler "PopOverSubmenu_Select" of group "PopOver" of card "Design" of stack "InteractBuilder" of behavior button "PopOver B" of card id 1002 of stack "IBResources"

line 7288 of handler "PopOverDoMenu" of group "PopOver" of card "Design" of stack "InteractBuilder" of behavior button "PopOver B" of card id 1002 of stack "IBResources"

line 1289 of handler "Book_SaveBookProps" of stack "InteractBuilder" of behavior button "Stack B" of card id 1002 of stack "Behaviors"

line 4971 of handler "CheckDBErr" of stack "libApp" of stack "libApp"

line 10946 of handler "DoError" of stack "InteractBuilder" of behavior button "Stack B" of card id 1002 of stack "Behaviors"


Answer
Ezra Weinstein (Administrator) fa 11 anys

Can you provide us with a small one page app that show this problem. I tried to recreate this bug but everything worked fine. When I delete the global text , it will dissapear from all the pages.

0
Respost

App dimension for all mobile devices

Tiffany Daniela McPhie fa 11 anys • updated by Alin Alexandru Matei fa 11 anys • 5
I was wondering what is the best dimension for an app so that the text fits in different devices, my app opens well in android tables but when it is opened in a smart phone, the text comes out of the background. What should I do to fix this issue?
Answer
Alin Alexandru Matei fa 11 anys
The app is automatically re-scaled when you'll open it on the phone.Could you attach to this post a screenshot ? Thank you.
0
Fixed

Move behavior constraints - keyboard input not allowed

Ranco fa 11 anys • updated by Inna Komarovsky fa 10 anys • 2

Used to work, stopped after last bug correction regarding the constraints.

Answer
Inna Komarovsky fa 10 anys

We have noticed that the keyboard entry works sporadically. We will work on this for the next release.

0
Respost

Take a Screen Shot of Pages

Cate O'Donnell fa 10 anys • updated by Alin Alexandru Matei fa 10 anys • 2
Is there a way to take a picture of the pages in the app so I can use them for the app icon and screen shots?
0
Fixed

Moving a frame animated element issue

Ranco fa 11 anys • updated by Inna Komarovsky fa 10 anys • 2
I have a frame animation (2 frames) running in a loop, which I also move linearly across the screen. After it reaches it's target position (6 sec), I added an animation (get element back to original position). This never happens, as if the action was never ended. Probably because of the loop animation. It used to work before 3.4. I have no workaround here, since I can't frame-animate for X amount of times, just once or loop. So I HAVE to loop.
Answer
Inna Komarovsky fa 10 anys
Just adding a note here that it looks like this has since been fixed. So if a frame element loops its frame animation while also doing a transition animation, then a behavior chained after the animation will begin after the transition is completed.
0
Respost

Designing for iphone & ipad Question

Charmaine Anderson fa 11 anys • updated by Alin Alexandru Matei fa 11 anys • 1
I designed my app for the iPad (1024 x 768) resolution and am wondering if it is required by apple for my app to also fit onto an iPhone, as I notice in their app store most apps are offered on both iPad and iPhone.  I don't think my app would work well on the iPhone's small screen size as the assets would appear rather small…. can you advise if you automatically scale the iPad version to fit on an iPhone or if I need to create another version of my app for the iPhone so it would fit the smaller screen size and where necessary, "dumb" down the user experience by reducing the number of assets on screen so they are large enough to interact with?  Thanks for your thoughts and advice on how to handle this.
Answer
Alin Alexandru Matei fa 11 anys
The app will be automatically be sized to iPhone version to so you'll only need to build it once.
0
Completat

Reappearance of Actions Sets deleted via the ‘Manage Action Sets’ screen:

Phil Moffat fa 11 anys • updated by Inna Komarovsky fa 10 anys • 3 • 1 duplicat
Reappearance of Actions Sets deleted via the ‘Manage Action Sets’ screen:
Dear IB Team, I sometimes find that Action Sets deleted (using the red X, then ‘Apply’) in the ‘Manage Action Sets’ screen don’t always appear as having been deleted when I return to view via the ‘Action’ tab in the ‘Props/Action/Info’ Info’ panel. I am using IB version 3.3.3 Build 325
Many thanks
Answer
Inna Komarovsky fa 10 anys

We were able to recreate this and we are working on a fix. Thank you for pointing out this bug.

0
Respost

Building apps for my clients?

Clint Sutton fa 11 anys • updated by Ezra Weinstein (Administrator) fa 11 anys • 2

Hi,

In one of your videos on "Build Apps and make money with Interactbuilder" you talk about using interactbuilder to build apps for clients.  I would like to know how this would work?

For example, if a client of mine wanted me to build them a book app, and I built it in your interactbuilder software.  How will the client get it?  How would I deliver the final app to them?  Will the client have to have a publishing membership?

How exactly can I use your software to "build apps" as you have mentioned in your video?

Clint


Answer
Ezra Weinstein (Administrator) fa 11 anys

Hi Clint,


The best way to handle this is for your customer to sign up to a publishing membership, but at the same time you could also submit the app to us by signing up yourself to a publishing membership, it's totally up to you.  

Basically once the app is submitted from the InteractBuilder we compile it and submit it to the app stores. If you want to use your own developer account we can transfer the app to your account or your customers account once we get it submitted.


As far as using our app, please watch our numerous videos, or look through our user guide to learn all about our software.  Our YouTube channel is: www.youtube.com/interactstudios.  You can download our software for free at: www.interactbuilder.com.




Customer support service by UserEcho